The Cube Home Elevator in Florida
Stay in the Florida home you love. The Cube is an air-powered, square home elevator for two- and three-story homes, assembled in the USA in Miami.
Prefer to talk? Call 877-814-7028
What happens next
- Tell us about your home
- A Cube Lifts specialist contacts you
- Book your free in-home consultation
The Cube, a square, air-powered home elevator, shown in a two-story home.
A home elevator that fits the Florida home you already love.
The Cube makes every floor of your two- or three-story Florida home easy to reach again.
If the stairs in your Florida home have become harder to climb, you do not have to give up the upstairs bedroom or the view from the top floor. The Cube carries you, and one more rider, between floors with a single push of a button. Its square shape tucks neatly into a corner, a closet or a space beside the stairs.
The Cube is self-supporting. In plain words, it stands on its own, so it needs no pit, no traditional shaft and no separate machine room. For your home, that means less digging, less dust and a much shorter project. Once the site is ready, installation takes 2 to 3 days.
Every Cube is pre-assembled and factory tested in Miami, Florida, so your elevator is assembled in the USA, right here in the state you call home. A PVE-certified dealer reviews your home, handles the install and stays with you for service. See how The Cube fits your home with a free consultation.
The cleanest home elevator on the market.
The Cube runs on air, with no harmful oils, gases or lubricants, and it uses the same kind of power as a washer and dryer. In Florida's storm season, it also lowers you safely if the power fails while it is moving.
- 01Air lifts you up
Machinery on top of the cab changes the air pressure and The Cube rises.
- 02Gravity brings you down
Air is let back in and the cab descends gently. No oils, gases or lubricants.
- 03Runs on home power
The same 220 to 240 volt supply as a washer and dryer.
Self-supporting, with no pit, shaft or machine room.
- Powered by air
- No pit, shaft or machine room
- Installed in 2 to 3 days
- 360 degree panoramic views
- Assembled in the USA
One elevator. Made your way.
The Cube comes in two layouts, so the choice is mostly about your home. Pick a 2-stop Cube if your home has two stories, or a 3-stop Cube if it has three. Either way, it carries up to two riders, and your dealer helps you choose the finish, panels and options that suit your rooms and your family.
The Cube in Black
- Riders
- Up to 2 passengers
The standard finish: a black aluminum frame with clear or smoked panels and 360 degree views.
Explore The Cube in Black
The Cube in White or Beige
- Riders
- Up to 2 passengers
A lighter frame for bright rooms. The color is chosen when you order.
Explore The Cube in White or Beige
Diamond Package
- Riders
- Up to 2 passengers
Diamond-shaped exterior shaft panels for 2- and 3-stop homes.
Explore Diamond Package
Through-floor install
- Riders
- Up to 2 passengers
The Cube can rise through the floor into a loft or upper room, after a dealer reviews the site.
Explore Through-floor installThe Cube carries up to two passengers (450 lb). It is not wheelchair accessible and not ADA compliant.
Serving homeowners across Florida.
From the Panhandle to Miami, PVE-certified dealers serve homeowners across Florida. Your dealer comes to your home for the site review, works with your county building department on the permit, installs your Cube and stays on for service. Wherever you live in the state, the first step is the same: a free consultation in your own home. Tell us where you are and we will connect you with your local dealer.
- FloridaYou are here
Also serving nearby: Miami, Hialeah, Destin, Santa Rosa County, Duval County.
Safe, simple and built to last.
Florida homes and Florida families have their own needs, from storm season to flood zones to planning for later years. Here is why The Cube suits a two- or three-story home here.
Assembled in the USA, in Florida
Every Cube is pre-assembled and factory tested in Miami, Florida. Your elevator is assembled in the USA, close to home, and arrives ready for a quick install. The Cube is made by PVE, a long-time leader in pneumatic home elevators.
No pit to dig
The Cube is self-supporting, so it needs no pit, no shaft and no machine room. If your home is in a flood zone, skipping the pit means nothing sits below your lowest floor. It also means less mess and a shorter project.
A calm ride in storm season
If the power fails while The Cube is moving, it lowers you to the lowest landing at a gentle speed and the doors unlock. A parked cabin stays at its landing. That is peace of mind for your family when summer storms roll in.
Clean, low-power design
The Cube runs on the same kind of household power as a washer and dryer. It uses no harmful oils, gases or lubricants, so there is nothing to leak in your home and nothing to smell on a hot day.
Light, open and modern
With 360 degree panoramic visibility, The Cube feels open, not closed in. Its aluminum frame and polycarbonate panels let light through, and the square shape fits neatly into your room. It looks like part of a modern Florida home.
Local help from start to finish
A PVE-certified dealer reviews your home, pulls the permit, installs The Cube and handles service. It needs minimal maintenance compared with many traditional elevators, and your dealer sets a schedule that suits you.
The Cube at home.





What happens during installation?
Your installation plan should cover the work before the elevator arrives as well as assembly and testing.
- Review the home
Confirm the layout, the people using the elevator and the levels it needs to serve.
- Confirm the model and location
Check dimensions, landing access and the requirements for the selected configuration.
- Prepare the site
Complete the agreed structural and electrical work and arrange the required permits and inspections.
- Install and hand over
Assemble and test the elevator, complete required approvals, and explain operation and ongoing care.
Timing depends on site preparation, the selected model and local requirements.
Schedule your free consultationHome elevator cost in Florida.
In Florida, the cost of your project depends on whether you choose a 2-stop or 3-stop Cube, the finish and options you pick, and the work your home needs first, such as a floor opening, an engineer's letter or a flood zone permit. Your dealer's free in-home consultation gives you the price for your home.
What affects your price
- StopsA 2-stop or a 3-stop home
- FinishBlack, Beige or White; Designer Series, Diamond Package
- Site workElectrical and structural prep, permits
- PlacementStandard or split-unit machinery mount
Questions Florida buyers ask about home elevators.
Will The Cube fit in my Florida home?
In many Florida homes, yes. The Cube is compact and square, made for two- and three-story homes, and it often fits in a corner, a closet or beside the stairs. It needs no pit or machine room, but it does need a floor opening and enough height above the top landing. Every home is different, so a PVE-certified dealer visits to check your space and find the best spot. Schedule your free consultation to see how The Cube fits your home.
Do I need a permit for a home elevator in Florida?
Yes, you need a local building permit from your county or city building department. Florida's state elevator rules do not cover elevators in private homes, so the permit comes from your local office instead. A licensed contractor must pull it, not you, and your dealer handles this for you. Rules vary by county, and some ask for an engineer's letter for the floor opening. A permit also protects your home insurance and makes a future sale easier.
My home is in a flood zone. Can I still have one?
Yes, you can, and The Cube's design helps. Because it needs no pit, nothing has to be dug below your lowest floor. If your home is in one of Florida's higher-risk flood zones, your county may ask for a floodplain development permit as well as the building permit, and the elevator must meet the state's flood construction rules. Your dealer checks your flood zone during the site visit and plans the paperwork with you, so nothing surprises you later.
How long will the installation take?
Installation takes 2 to 3 days once your site is ready. Before that, your home needs some preparation, such as the floor opening and the right electrical outlet, and your county needs to issue the permit. Most Florida counties review these permits within a few weeks, though it varies. Because The Cube arrives pre-assembled from Miami and needs no pit or shaft, the work inside your home stays short and tidy. Your dealer gives you a timeline for your home.
What happens if the power goes out during a hurricane?
If the power fails while The Cube is moving, it lowers you gently to the lowest landing and the doors unlock. You are not left waiting between floors. If the cabin is parked at a landing when the power goes out, it simply stays there. Florida storms can knock out power across whole counties, so during hurricane season it makes sense to bring the cabin down before a storm arrives. Your dealer can walk you through it.
Will it work for someone in a wheelchair?
No, The Cube is not wheelchair accessible and is not ADA compliant. It is made for one or two riders who can stand, or sit on the optional folding seat. It suits people who find the stairs hard but can still walk a few steps on their own. If someone in your family uses a wheelchair, tell your dealer during your consultation so they can talk through what your home needs. Honest advice up front saves you time.
How much does a home elevator cost in Florida?
The price depends on your home and the Cube you choose, so a free consultation gives you the number for your home. A 2-stop or 3-stop layout, your finish and options, and the prep your home needs all play a part. In Florida, the local permit, a possible engineer's letter and flood zone paperwork can also shape the project. Your dealer sets the price and walks you through it at your kitchen table, with no obligation.
Who takes care of it after it is installed?
A local PVE-certified dealer installs your Cube and handles your service afterward. The Cube needs minimal maintenance compared with many traditional elevators, and it uses no harmful oils, gases or lubricants. Your dealer sets a service schedule that suits your home and is your first call if you ever have a question. Cube Lifts is based in Hialeah, Florida, and PVE has built pneumatic home elevators for many years, so help is never far away.
Built for the way Florida lives.
- Who it is for
- One of the oldest populations of any state
- State rules
- No state elevator certificate for private homes
- Permit
- Local building permit, pulled by a licensed contractor
- Install time
- 2 to 3 days once the site is ready
Florida has one of the largest senior populations in the country, and its share of residents over 65 is among the highest of any state. The state expects that share to keep growing. If you plan to age in place, you are in good company, and a home elevator is one of the simplest ways to keep every room of your house within easy reach.
Many Florida families are also planning for a parent. If your mother or father is moving in, or you are helping them stay in their own two-story home, The Cube lets them reach the upstairs on their own terms. An in-cabin folding seat is an option for anyone who would rather sit for the ride.
Here is good news about state rules. Florida's Elevator Safety Act does not cover elevators in private homes, and the state does not license them or ask for a state certificate of operation. Under state law, a private residence means a single-family home or an apartment. So your project follows local building rules, not the state elevator bureau.
You will still need a local building permit from your county or city building department. In Florida, a licensed contractor must pull that permit, not the homeowner, so your PVE-certified dealer takes care of it for you. Rules vary from county to county, and some counties ask for a structural engineer's letter when the opening goes through a load-bearing floor. Most counties review the permit within a few weeks.
A permit also protects you. Most Florida homeowners insurance policies exclude unpermitted work. And if you ever sell, Florida sellers must tell buyers about known unpermitted work. A permitted elevator keeps your coverage and your future sale simple.
No pit to dig means no pit to flood.
If your home sits in a flood hazard area, the Florida Building Code asks elevators there to meet flood construction rules. Homes in the state's higher-risk flood zones may also need a floodplain development permit on top of the building permit. The Cube helps because nothing is dug below your lowest floor. Your dealer checks your flood zone during the site review and plans the paperwork with you.
Storm season matters too. When Hurricane Isaias came ashore near Destin, hundreds of thousands of Florida power accounts went dark, and nearly all of Santa Rosa County lost power. If the power fails while The Cube is moving, it lowers you gently to the lowest landing and the doors unlock. A cabin parked at a landing simply stays there, so it makes sense to ride down before a storm arrives.
If you are building, you are not alone: Florida permits a great many new single-family homes every month. Adding The Cube to your plans early lets your builder frame the floor opening and place the outlet where it is needed. That keeps the install quick once the house is ready.
Looking for something different?
Ready to see The Cube in your Florida home?
Tell us about your home, your stairs and who will ride. A local PVE-certified dealer will set up a free consultation, look at your space and give you a quote for your home. No pressure, just honest advice. Contact us today.
877-814-7028- Head office
- 4151 West 108th Street, Suite #1, Hialeah, FL 33018
- Phone
- 877-814-7028
- [email protected]
- Hours
- Mon – Fri 8am – 4pm EST · Sat – Sun closed
Claim Your Free Consultation
Share a few details about your Florida home and we will be in touch.


