The Cube Home Elevator in Arizona
The Cube is an air-powered, square home elevator for two- and three-story Arizona homes, so you can keep enjoying every floor of the house you love.
Prefer to talk? Call 877-814-7028
What happens next
- Tell us about your home
- A Cube Lifts specialist contacts you
- Book your free in-home consultation
The Cube, a square air-powered home elevator, shown in a two-story home.
An easier way between floors in your Arizona home
Keep your upstairs rooms, your routines and your home, with one calm ride between floors.
Maybe the climb to the bedroom feels longer after a knee surgery. Maybe a parent is moving in, or you are building in Arizona and want an elevator in the plan from day one. In each case the goal is the same: you stay in the home you chose and use all of it.
The Cube is a square residential elevator for up to two passengers. It runs on air, not cables or oil, and it stands on its own frame. That means no pit to dig and no machine room to build, which keeps the work in your home small. Its clear panels give you 360 degree visibility, so the ride feels open, not boxed in.
Whether your home has two stories or three, The Cube is made for 2-stop and 3-stop layouts. A PVE-certified dealer looks at your floors, ceilings and power before you decide anything. Below, you will find what Arizona asks for in permits and inspection, so you can plan your project with no surprises.
The cleanest home elevator on the market.
The Cube runs on the same household power as a washer and dryer and uses no harmful oils or lubricants. If a Phoenix Valley storm cuts the power while you ride, it lowers you gently to the lowest landing.
- 01Air lifts you up
Machinery on top of the cab changes the air pressure and The Cube rises.
- 02Gravity brings you down
Air is let back in and the cab descends gently. No oils, gases or lubricants.
- 03Runs on home power
The same 220 to 240 volt supply as a washer and dryer.
Self-supporting, with no pit, shaft or machine room.
- Powered by air
- No pit, shaft or machine room
- Installed in 2 to 3 days
- 360 degree panoramic views
- Assembled in the USA
One elevator. Made your way.
If you live in a two-story Arizona home, a 2-stop Cube links the ground floor to the bedrooms above. In a three-story home, the 3-stop setup reaches every level. Couples who ride together will like the room for two, a folding seat helps a rider who prefers to sit, and your dealer can show you finishes like the Designer Series.
The Cube in Black
- Riders
- Up to 2 passengers
The standard finish: a black aluminum frame with clear or smoked panels and 360 degree views.
Explore The Cube in Black
The Cube in White or Beige
- Riders
- Up to 2 passengers
A lighter frame for bright rooms. The color is chosen when you order.
Explore The Cube in White or Beige
Diamond Package
- Riders
- Up to 2 passengers
Diamond-shaped exterior shaft panels for 2- and 3-stop homes.
Explore Diamond Package
Through-floor install
- Riders
- Up to 2 passengers
The Cube can rise through the floor into a loft or upper room, after a dealer reviews the site.
Explore Through-floor installThe Cube carries up to two passengers (450 lb). It is not wheelchair accessible and not ADA compliant.
Serving homeowners across Arizona.
We work with homeowners in cities and towns across Arizona, from the Phoenix Valley to Tucson. Every city has its own building department and its own pace for plan review, so your dealer starts with a visit to your home and a look at what your city asks for. From there, you get a clear plan and a free quote for your project.
- ArizonaYou are here
Also serving nearby: Phoenix, Tucson, Mesa, Scottsdale, Chandler, Gilbert, Tempe, Glendale, Peoria, Flagstaff, Prescott.
Safe, simple and built to last.
Here is what The Cube brings to your Arizona home, from the day of the install to the years you spend riding it with your family.
No pit and no shaft
The Cube stands on its own frame, so you do not dig a pit or build a shaft. In most homes, the work is a floor opening or a balcony mount. The install takes 2 to 3 days once site preparation is complete, so you spend less time with workers in your house and get back to your routine sooner.
A calm ride through storm season
Valley storms can cut the power. If that happens while you ride, The Cube lowers you gently to the lowest landing and the door unlocks. A cabin parked at a landing stays right where it is, ready when the power returns. You can ride with confidence all year.
Everyday household power
The Cube runs on single-phase power, the same kind your washer and dryer use. It needs no harmful oils, gases or lubricants, so there is nothing messy to store or change in your home. If your home needs a new circuit, your dealer will point that out during the site visit.
Room for two
The Cube carries up to two passengers and up to 450 lbs, so you and a partner can ride together. An in-cabin folding seat is an option for a rider who would rather sit for the trip between floors. Grab a laundry basket or a bag of groceries and ride up with it.
An open, square design
The square shape fits neatly into a corner or along a wall. Clear panels give you 360 degree visibility as you ride. The Designer Series and the Diamond Package let you match the look to your rooms, and you can choose clear or smoked panels.
Assembled in the USA
Every Cube is pre-assembled and factory tested in Miami, Florida, and is assembled in the USA. It comes from PVE, a long-time maker of pneumatic elevators. It needs minimal maintenance, and a PVE-certified dealer handles site review, installation and support.
The Cube at home.
What happens during installation?
Your installation plan should cover the work before the elevator arrives as well as assembly and testing.
- Review the home
Confirm the layout, the people using the elevator and the levels it needs to serve.
- Confirm the model and location
Check dimensions, landing access and the requirements for the selected configuration.
- Prepare the site
Complete the agreed structural and electrical work and arrange the required permits and inspections.
- Install and hand over
Assemble and test the elevator, complete required approvals, and explain operation and ongoing care.
Timing depends on site preparation, the selected model and local requirements.
Schedule your free consultationHome elevator cost in Arizona.
The cost of your project depends on the model, whether you need two stops or three, the finish you pick, and the site work your home needs, such as a floor opening or a new electrical circuit. Permit fees are set by each Arizona city or county, so a free quote gives you the real price for your home.
What affects your price
- StopsA 2-stop or a 3-stop home
- FinishBlack, Beige or White; Designer Series, Diamond Package
- Site workElectrical and structural prep, permits
- PlacementStandard or split-unit machinery mount
Questions Arizona buyers ask before ordering
Can The Cube go in my two-story house?
In many cases, yes, but it depends on your floors and ceilings. The Cube is made for two- and three-story homes and needs no pit or machine room, so it fits where a larger elevator often cannot. Still, it cannot go in every home. A PVE-certified dealer will look at the spot you have in mind, the space above it and your power supply. Schedule your free consultation to find out how it fits your Arizona home.
Do I really need a permit for an elevator in my own home?
Yes, you do. Arizona treats a home elevator as a permitted project, even in a single-family house. You will need a permit from your city or county, engineered drawings, and a state inspection before the first ride. It may sound like a lot, but it protects you. A lift put in without a permit can bring state enforcement and trouble when you sell. Your dealer helps you gather what the building department asks for.
Who checks the elevator before we can use it?
A state inspector from ADOSH checks it. Once the install is done, the inspector performs a final acceptance inspection in your home. If it passes, ADOSH issues a certificate of operation, and only then can you ride. Your city or county issues the permit, but this final sign-off comes from the state. Plan for this step in your timeline, and ask your dealer how they schedule the visit for you, so the day goes smoothly.
How soon could we be riding it?
For most Arizona homes, plan on several weeks to a few months from start to first ride. The permit review usually takes the longest, often a few weeks and sometimes close to two months, depending on your city. After that, the install itself takes 2 to 3 days once site preparation is complete. Then the state inspection follows. Sending complete plans the first time is the best way to avoid extra rounds of changes.
Will we be stuck if the Valley loses power?
No, you will not be left between floors. If the power fails while The Cube is moving, it lowers you gently to the lowest landing and the door unlocks so you can step out. If the cabin is parked at a landing when the power goes, it stays at that landing. That matters in the Phoenix Valley, where storms have caused power outages. Your dealer can walk you through how it works.
Someone in our family uses a wheelchair. Will The Cube work for us?
No, The Cube is not wheelchair accessible and is not ADA compliant. It is a compact elevator for one or two people who can stand or sit on the optional folding seat. Elevators in single-family homes are generally not covered by the ADA, so the choice is yours to make for your family. Tell your dealer about everyone who will ride, and they can talk through the options that suit your household.
Will it cause any trouble when we sell the house?
Not if it is permitted and signed off by the state. Arizona notes that lifts put in without permits can cause problems when a home is sold. With a permit, a state inspection and a certificate of operation, your elevator is on record and ready to show a buyer. We never promise a set increase in home value, but a properly approved elevator is one less question at sale time. Keep your papers handy for that day.
What will an elevator cost for our home?
The price depends on your home and the choices you make. Two stops or three, the finish, upgrades like a folding seat, and the site work your house needs all play a part. Permit fees also vary, since each Arizona city or county sets its own. The dealer sets the final price, so the best way to get a real number is a free in-home consultation. Find your MSRP with a free estimate.
Built for the way Arizona lives.
- Who reviews your plans
- Your city or county building department
- Final sign-off
- ADOSH state inspection and certificate of operation
- Permit review
- Often a few weeks, sometimes close to two months
- Install time
- 2 to 3 days once site preparation is complete
You are far from alone in planning to stay put. A large share of Arizonans are of retirement age, and the state's older population has grown much faster than the nation's in recent years. For many families, that means a parent who wants to age in place in a home with stairs, or a couple thinking ahead. An elevator lets that plan work without a move. If you are the grown child helping a parent, it can also make every visit home easier for the whole family.
In Arizona, a home elevator is a permitted project, even in a single-family house. You will need a permit application, engineered drawings and a state inspection before anyone rides it. The work also follows the state's elevator code, which Arizona adopted in full. Home lifts must meet the state's standards too, and your dealer prepares the plans with that in mind. For you, that is good news: every step is checked, and your elevator is on record.
Two offices share the job. Your city or county building department reviews the plans and issues the permit. Then ADOSH, the state office that oversees elevator safety, sends an inspector to check the finished elevator. Once that inspection passes, ADOSH issues a certificate of operation, and you need both papers before your first ride.
The state also cares about who does the work. Arizona requires a licensed elevator contractor, licensed through the Arizona Registrar of Contractors, and that license number goes on your permit application. When you meet your dealer, ask how the installer and the paperwork will be handled for your home. A clear answer at the start saves time later.
Plan review takes some patience. Approval in Arizona often takes a few weeks and can stretch toward two months. Each city sets its own pace: Scottsdale is often among the quicker, Tucson and Mesa are close behind, and Phoenix can take a little longer. Phoenix and Scottsdale also offer faster review for an extra fee, if your timing is tight.
The most common delay is a set of plans sent back for changes, since each round of corrections can add weeks. A complete package holds the drawings, the equipment details, the application form, the contractor's license and a site plan. In cities with online portals, a simple home lift with complete papers can clear review fast. Fees are set by each building department, so they vary by city.
Permit first, then a short install, then the state's sign-off.
Storms in the Phoenix Valley have caused damage and power outages. If the power fails while The Cube is moving, it lowers you at a gentle, controlled speed to the lowest landing, and the door unlocks. If the cabin is parked at a landing, it simply stays there. Either way, you are not left waiting between floors. Ask your dealer to show you how this works, so everyone at home knows what to expect.
Doing it by the book also protects your home's future. A lift put in without a permit can bring state enforcement and can cause trouble when you sell. Once yours is in, Arizona sets regular inspection intervals for elevators, so ask your dealer how inspections and service visits fit together for your home. Keep your permit, your certificate of operation and your service records together, and they are easy to find when you need them.
Looking for something different?
Ready to plan your Arizona home elevator?
Tell us about your home, who will ride and which floors you want to reach. A PVE-certified dealer will look at your space, explain the Arizona permit steps and give you a free quote, with no pressure to decide.
877-814-7028- Head office
- 4151 West 108th Street, Suite #1, Hialeah, FL 33018
- Phone
- 877-814-7028
- [email protected]
- Hours
- Mon – Fri 8am – 4pm EST · Sat – Sun closed
Claim Your Free Consultation
Share a few details about your Arizona home and we will be in touch.